Press "Enter" to skip to content

Download e-book for iPad: Applications of Texture Analysis by

ISBN-10: 0470408359

ISBN-13: 9780470408353

ISBN-10: 0470444215

ISBN-13: 9780470444214

This quantity includes papers provided on the fifteenth foreign convention at the Texture of fabrics from June 1-5th, 2008 in Pittsburgh, PA. Chapters comprise:

  • Thin motion pictures
  • Texture at Non-Ambient stipulations
  • Novel Texture dimension thoughts together with 3D
  • Complex Oxides
  • Interface Textures
  • Recrystallization Texture
  • Biomaterials
  • Texture results on harm Accumulation
  • Digital Microstructures

View details on Materials Processing and Texture: Ceramic Transactions, quantity 200.Content:
Chapter 1 the feel of skinny NiSi movies and Its impact on Agglomeration (pages 1–9): okay. De Keyser, C. Detavernier, R. L. Van Meirhaeghe, J. Jordan?Sweet and C. Lavoie
Chapter 2 Epitaxial Substrates from Ni?Based Ternary Alloys with Cr and W (pages 11–22): D.P. Rodionov, I.V. Gervasyeva, Yu.V. Khlebnikova and V.A. Kazantsev
Chapter three dice Texture Formation in Ni?Pd and Ni?Pd?W Alloys for HTS Tapes (pages 23–34): I.V. Gervasyeva, D.P. Rodionov, Yu.V. Khlebnikova, G.A. Dosovitskii and A.R. Kaul
Chapter four Texture of quickly Solidified Cu skinny movies Studied through SEM EBSD and TEM (pages 35–45): R. Zhong, A. Kulovits, J.M.K. Wiezorek and J.P. Leonard
Chapter five regulate of Texture in Polycrystalline skinny movies Used as facts garage Media (pages 47–56): David E. Laughlin, Hua Yuan, En Yang and Chun Wang
Chapter 6 affects of Processing Parameters on Microstructures and Microtextures of Au turn Chip Bonds in the course of Microelectronics Packaging (pages 57–62): P Yang, C?M Li, D?M Liu, M Hung, M Li and W?M Mao
Chapter 7 In Situ remark of Texture Evolution in Ti?10?2?3 (pages 65–72): Seema L. Raghunathan, Richard Dashwood, Martin Jackson, Sven Vogel and David Dye
Chapter eight examine of Texture Evolution at excessive pressure premiums in FCC fabrics (pages 73–81): Nilesh Gurao, Satyam Suwas and Rajeev Kapoor
Chapter nine Texture and Microstructure improvement in Copper After Cryogenic Rolling and warmth therapy (pages 83–94): A. Haldar, D. Das and P.P. Chattopadhyay
Chapter 10 In?Situ EBSD examine of the ????? part Transformation in a Microalloyed metal (pages 95–102): I. Lischewski, D.M. Kirch, A. Ziemons and G. Gottstein
Chapter eleven Texture adjustments in the course of part ameliorations Studied in situ With Neutron Diffraction (pages 103–113): Hans?Rudolf Wenk
Chapter 12 Three?Dimensional FIB?OIM of Ceramic fabrics (pages 117–124): Shen J. Dillon and Gregory S. Rohrer
Chapter thirteen comparability of X?Ray and EBSD Textures for Back?Annealed Al?Mg Alloys (pages 125–133): O. Engler
Chapter 14 a brand new process for Quantification of Texture Uniformity of Plate (pages 135–146): Peter Jepson and Robert Bailey
Chapter 15 setting apart Coincident Electron Backscatter Diffraction styles close to Interfaces (pages 147–154): Josh Kacher, Brent L. Adams, David Fullwood and Colin Landon
Chapter sixteen speedy Texture choice in line with Dimensional X Ray Detector (pages 155–162): Weimin Mao
Chapter 17 Semiautomatic choice of Orientations and Elastic pressure from Kossel Microdiffraction (pages 163–169): Adam Morawiec, Raphael Pesci and Jean?Sebastien Lecomte
Chapter 18 Statistically trustworthy EBSD research approach to Grain Boundary Characterization (pages 171–179): D.H. Kim, J.Y. Kang, D.I. Kim, E.K. Her, S.J. Kim, H.N. Han, K.M. Oh and H.C. Lee
Chapter 19 3D Microstructures and Textures of a airplane pressure Compressed {110}<112> Al?0.3% Mn unmarried Crystal (pages 181–188): H. Paul, J.H. driving force and Cl. Maurice
Chapter 20 3 legislation of Substructure Anisotropy of Textured steel fabrics, published by way of X?Ray approach to Generalized Pole Figures (pages 189–195): Yuriy Perlovich, Margarita Isaenkova and Vladimir Fesenko
Chapter 21 3D?Microstructural and Texture Characterization in numerous size Scales (pages 197–204): Roumen Petrov, Patricia Gobernado Hernandez, Orlando Leon Garcia, Hemant Sharma and Leo Kestens
Chapter 22 neighborhood Crystal Rotations of Bulk Grains through High?Resolution EBSD in the course of scorching PSC of Al–0.1 % Mn Polycrystals (pages 205–212): Romain Quey, David Piot and Julian Driver
Chapter 23 Grain Boundary Orientations in a Fe?Mn?Cu Polycrystalline Alloy (pages 213–220): M. Takashima and P. Wynblatt
Chapter 24 improvement of a TEM?Based Orientation Microscopy process (pages 221–228): S. Zaefferer and G. Wu
Chapter 25 area keep an eye on influence on Voltage?Strain in BaTiO3 unmarried Crystal (pages 230–238): Yoshio Akimune, Kazuo Matsuo, Ryutaro Oishi and Akira Okada
Chapter 26 Tentative Simulation of Crystal Rotation for NaCl constructions (pages 239–248): Hiroaki Masui
Chapter 27 Grain Boundary styles in Dynamically Recrystallized Quartz Aggregates (pages 250–260): Cristiane Castro and Leonardo Lagoeiro
Chapter 28 The Correlation among Grain Boundary personality and lntergranular Corrosion Susceptibility of 2124 Aluminum Alloy (pages 261–267): L.H. Chan, H. Weiland, S. Cheong, G.S. Rohrer and A.D. Rollett
Chapter 29 Rodrigues?Frank areas for Misorientations and Orientation Relationships among Crystals of Any Crystallographic aspect teams (pages 269–280): Youliang He and John J. Jonas
Chapter 30 Origins of Texture reminiscence in Steels (pages 281–290): Bevis Hutchinson and Leo A.I. Kestens
Chapter 31 A Grain Boundary research of Cemented Tungsten Carbides utilizing OIM (pages 291–304): Vineet Kumar, Zhigang Zak Fang, S.I. Wright and M.M. Nowell
Chapter 32 The impression of Grain and part Boundary Misorientation on Nucleation in the course of Solid?state part variations in a Co?l5Fe Alloy (pages 305–311): H. Landheer, S.E. Offerman, L.A.I. Kestens, T. Takeuchi, M. Enonioto and Y. Adachi
Chapter 33 Microstructural amendment in a 15Cr?15Ni?2.2 Mo?Ti changed Austenitic stainless-steel via dual prompted Grain Boundary Engineering (pages 313–321): Sumantra Mandal, P.V. Sivaprasad and V. Subramanya Sarma
Chapter 34 impression of pressure direction and Annealing on improvement of Resistance to lntergranular Degradation in Austenitic Stainless Steels (pages 323–334): V. Randle, R. Jones, T.J. Marrow and D. Engelberg
Chapter 35 Evolution of the Grain Boundary personality Distribution in Strontium Titanate in the course of Grain progress (pages 335–342): Herbert M. Miller and Gregory S. Rohrer
Chapter 36 A version for the foundation of Anisotropic Grain Boundary personality Distributions in Polycrystalline fabrics (pages 343–353): Gregory S. Rohrer, Jason Gruber and Anthony D. Rollett
Chapter 37 Nucleation of the first Al part on TiAl3 in the course of Solidification of a Hot?Dip Zn?11%Al?3%Mg?0.2%Si Coating on metal Sheet (pages 355–362): Kazuhiko Honda, Kohsaku Ushioda and Wataru Yamada
Chapter 38 Textural Inhomogeneity influence throughout the Monte Carlo Simulation of the irregular Goss Grain development in Fe?3%Si metal Grade HiB (pages 365–372): T. Baudin, R. Penelle and D. Ceccaldi
Chapter 39 fending off Roping and Ridging in AA6XXX Sheets: Characterizing the preliminary kingdom (pages 373–380): T.A. Bennett, R.H. Petrov and L.A.I. Kestens
Chapter forty improvement of dice Texture in Cold?Rolled and Annealed Multilayer Tapes for lined Superconductor functions (pages 381–390): P.P. Bhattacharjee and R.K. Ray
Chapter forty-one results of Elastic Modulus on Deformation and Recrystallization of excessive Purity Nb (pages 391–398): D. Baars, H. Jiang, T.R. Bieler, A. Zamirit, F. Pourboghrat and C. Compton
Chapter forty two Through?Process Texture Modelling of AA6016 from sizzling Rolling to ultimate Annealing (pages 399–408): C. Bollmann and G. Gottstein
Chapter forty three dice Texture because of Dynamic Recrystallization in Pb and Pb?62%Sn Alloys below equivalent Chanel Angular Extrusion Processing (pages 409–420): R.E. Bolmaro, V.L. Sordi, M. Ferrante, WeiMin Gan and H.?G. Brokmeier
Chapter forty four Annealing Texture Evolution (pages 421–428): I.L. Dillamore
Chapter forty five at the balance of Recrystallization Textures in Low Alloyed Zirconium Sheets (pages 429–436): Francois Gerspach, Nathalie Bozzolo and Francis Wagner
Chapter forty six An research of the feel and suggest Orientation of Aluminium Alloy AA5052 Subjected to ahead and opposite scorching Torsion and next Annealing (pages 437–444): O. Hernandez?Silva, B.P. Wynne and W.M. Rainforth
Chapter forty seven Evolution of {111} Recrystallization Texture in Al?Mg?Si Alloy Sheets Processed by means of Symmetric and uneven mixture Rolling (pages 445–452): Hirofumi Inoue, Satoshi Kobayashi, Masayuki Hori, Toshio Komatsubara and Takayuki Takasugi
Chapter forty eight impression of exterior Constraint and Deviation from perfect Orientation on improvement of Rolling Texture in natural Aluminum unmarried Crystal Having {100} <001> Orientation (pages 453–460): Keizo Kashihara and Hirosuke Inagaki
Chapter forty nine Nucleation and development of latest Grains in Deformed Quartz unmarried Crystals (pages 461–468): Leonardo Lagoeiro and Paola Barbosa
Chapter 50 Rolling and Annealing Textures of Silver Sheets (pages 469–480): Dong Nyung Lee, Heung Nam Han and Se?Jong Kim
Chapter fifty one functionality of Layer Thickness at the Microstructural Evolution in Copper of Annealed Roll?Bonded CuNb Composites (pages 481–488): S.C.V. Lim and A.D. Rollett
Chapter fifty two impression of Taylor issue M on Recrystallization of The dice and Cube?Family Grains in FCC steel (pages 489–498): Hiroaki Masui
Chapter fifty three Multi?Cycle Pinch Welding of 304L Tubes: Inhomogeneities in Deformation and Recrystallization Textures and Microstructures (pages 499–506): C.T. Necker, A.N. Marchi and M.G. Smith
Chapter fifty four impression of Mg focus on Texture Formation in Al?Mg Alloys in the course of hot temperature Compression (pages 507–513): Kazuto Okayasu, Hiroki Takekoshi, Masayuki Sakakibara and Hiroshi Fukutomi
Chapter fifty five Ultra?Fine Grain Austenitic Stainless Steels: impact of Texture in the course of Recrystallization (pages 515–522): Angeline Poulon?Quintin, Stephanie Brochet, Jean?Bernard Vogt, Jean?Christophe Glez and Jean?Denis Mithieux
Chapter fifty six styles of Deformation and linked Recrystallization in Warm/Hot Deformed AA6022 (pages 523–528): S. Raveendra, S. Mishra, H. Weiland and that i. Samajdar
Chapter fifty seven stories on Texture and Microstructure of Cryorolled and Annealed Cu?5%Al, Cu?5%Zn Alloys (pages 529–536): V.L. Niranjani, Nilesh Gurao, U. Wendt, S. Suwas and V. Subramanya Sarma
Chapter fifty eight Modeling of Texture improvement in the course of Tandem sizzling Rolling of AA3103 (pages 537–545): C. Schafer, V. Mohles and G. Gottstein
Chapter fifty nine Texture amendment in Asymmetrically Rolled Aluminum Sheets (pages 547–554): Jurij Sidor, Roumen Petrov, Alexis Miroux and Leo Kestens
Chapter 60 In?Situ SEM/EBSP research in the course of Annealing in Al?Mg Alloys (pages 555–560): Yoshimasa Takayama, Kazuhiro Morita, Hajime Kato and Yoshimasa Ookubo
Chapter sixty one orientated Grain progress and the influence of In Situ Annealing on Texture in AlMn Alloys (pages 561–568): Caterina E. Tommaseo and H. Klein
Chapter sixty two Subgrain Coarsening of Hot?Rolled AA5005 Aluminum Alloy: A comparability among EBSD Observations and Monte Carlo (pages 569–576): Shengyu Wang, Mohammed H. Alvi and Anthony D. Rollett
Chapter sixty three impact of Low attitude Grain barriers on Recrystallization (pages 577–584): Myrjam successful and Dierk Raabe
Chapter sixty four comparability of Calcite Crystallographic Texture within the Shells of the Rhynchonelliform Brachiopod, Terebratulina Retusa and the Bivalve Mollusc, Mytilus Edulis (pages 586–593): M. Cusack, A. Perez?Huerta, P. Dalbeck, P. Chung and M.R. Lee
Chapter sixty five put on Resistance and Texture Evolution of extremely excessive Molecular Weight Polyethylenes in the course of Uniaxial Compression (pages 595–603): D.S. Li, H. Garmestani, S.C. Davis, L.K. Moss, A.K. Siddiqi, J.B. Guthrie, N. Johansen and L. Matrisciano
Chapter sixty six Texture and Microstructure of recent Rhynchonellide Brachiopod Shells—An Ontogenetic examine (pages 605–617): E. Griesshaber, R.D. more recent, U. model and W.W. Schmahl
Chapter sixty seven Peering Into the Eyes of Trilobites utilizing EBSD (pages 619–626): C. Torney, M.R. Lee and A.W. Owen
Chapter sixty eight Texture and Anisotropy of MP35N cord for behavior Leads (pages 627–635): Bernard Q. Li and Tom Steigauf
Chapter sixty nine Crystallographic Textures from the Exoskeleton of the Lobster Homarus Americanus and Calculation of the Mechanical homes of the Calcite section (pages 637–654): L. Raue, H. Klein, D. Raabe and H. Fabritius
Chapter 70 Experimental Characterization of the impression of Crystallography at the 3 Dimensional Nucleation and progress of Fatigue Cracks in Metals (pages 656–668): J?Y Buffiere, E. Ferrie, H. Proudhon and W. Ludwig
Chapter seventy one Reversible Texture Transition in the course of Accumulative Roll Bonding (pages 669–680): Naoya Kamikawa, Xiaoxu Huang, Grethe Winther, Nobuhiro Tsuji and Niels Hansen
Chapter seventy two Evolution of Grain Boundary Microstructures in Molybdenum by means of Thermomechanical Processing from unmarried Crystals (pages 681–692): Shigeaki Kobayashi, Sadahiro Tsurekawa and Tadao Watanabe
Chapter seventy three neighborhood Characterization of Void Initiation on IF metal through FIB?EBSD method (pages 693–700): Orlando Leon?Garcia, Roumen Petrov and Leo Kestens
Chapter seventy four Experimental and Simulation learn on Texture and Bendability of AA5XXX Aluminum Alloys (pages 701–708): Y. Liu, Z. lengthy, X.Y. Wen, S. Ningileri and S.K. Das
Chapter seventy five a few points on Grain development in ECAP Deformed and warmth handled Aluminum 1.2% Hafnium Alloy (pages 709–716): O. Al?Buhamad, M.Z. Quadir and M. Ferry
Chapter seventy six Kinetic Measurements of Texture and Microstructural Evolution utilizing Orientation Distribution functionality and Residual pressure leisure (pages 717–723): S. Saimoto, J. Cooley and C. Gabryel
Chapter seventy seven Texture and Micro?Hardness Evolution of Submicrograined Copper (pages 725–731): X.S. Yao, Y.D. Liu, Q.W. Jiang, X. Zhao and that i. Zuo
Chapter seventy eight A version of Plastic Spin considering Grain interplay in the course of Rolling (pages 734–744): A. Fourty, J.W. Signorelli and R.E. Bolmaro
Chapter seventy nine CPFEM research of the influence of Grain form at the Planar Anisotropy and the Shear Banding of Textured steel Sheets (pages 745–756): Laurent Delannay, Maxime A. Melchior, Anand ok. Kanjarla, Paul Van Houtte and Javier W. Signorelli
Chapter eighty Modelling of basic Recrystallization utilizing electronic Microstructures (pages 757–769): R.E. Loge, M. Bernacki, H. Resk, H. Digonnet, Y. Chastel and T. Coupez
Chapter eighty one Two?Phase Microstructure new release in 3D in line with 2nd Sections of a Nickel Alloy (pages 771–778): C.G. Roberts, S.L. Semiatin and A.D. Rollett
Chapter eighty two Evolution of neighborhood harm Variable and Its expense of Strain?Softening fabric in stress in keeping with Nonlocal idea (pages 779–786): X.B. Wang
Chapter eighty three Grain interplay and comparable Elastic Fields at Triple Junction in Low Deformed IF metal: Micromechanical version and Reconstruction from EBSD Orientation info (pages 787–801): A.A. Zisman, V.V. Rybin, M. Seefeldt, S. Van Boxel and P. Van Houtte
Chapter eighty four Gradient Matrix approach to picture Crystal Curvature with Discrete Orientation facts: Case examine of Triple Junction in Deformed IF metal (pages 803–814): A.A. Zisman, M. Seefeldt, S. Van Boxel and P. Van Houtte

Show description

Read or Download Applications of Texture Analysis PDF

Best nanostructures books

Read e-book online Nanovision: engineering the future PDF

The dawning period of nanotechnology can provide to rework lifestyles as we all know it. Visionary scientists are engineering fabrics and units on the molecular scale that would eternally adjust the way in which we predict approximately our applied sciences, our societies, bodies, or even truth itself. Colin Milburn argues that the increase of nanotechnology comprises a manner of for the reason that he calls “nanovision.

New PDF release: Nanostructured Materials and Nanotechnology: Ceramic and

Papers from the yankee Ceramic Society's thirty first overseas convention on complex Ceramics and Composites, held in Daytona seashore, Florida, January 21-26, 2007. themes comprise synthesis, fictionalization, processing, and characterization of nanomaterials; structure-property correlations at nanometer size scales; bio- and magnetic nanomaterials; basics in nanoscale platforms and strategies; nanostructured fabrics for chemical mechanical planarization, demonstrate, wellbeing and fitness and beauty purposes; nanotubes and nanowires, nanolithography, and business improvement of nanomaterials.

Get Metal nanoparticles for catalysis : advances and PDF

Catalysis is a important subject in chemical transformation and effort conversion. due to the awesome achievements of colloidal chemistry and the synthesis of nanomaterials during the last 20 years, there have additionally been major advances in nanoparticle catalysis. Catalysis on diverse steel nanostructures with well-defined constructions and composition has been broadly studied.

Additional info for Applications of Texture Analysis

Example text

De Boer, N . Reger, L. -R.. J. Eickemeyer, P. Berberich, W. Prusseit, B. Holzapfel. and L. Schultz, Biaxially Textured Ni-Alloy Tapes as Substrates for Buffer and Y-BaCu-0 Film Growth, IEEE Transucrions on Applied Superconductivity. 11. 1, 3477-3480 (2001). C. Michel, I,. L. Rousset, P. S. Prakash, J. Massardier, Y. C. Bertolini, Surface Characterization and Reactivity of Pd~Ni92(1 1 1 ) and (1 10) Alloys. Surj? 228-294 (1998). N. B. J. Rous, The Surface Structure and Segregation Profile of NisoPdso ( I 00): A Dynamical LEED Study.

Data for Niqs 1W49are given for comparison. s $ 44- E z 12- E c E 8C 8 x 10- 86--- 4 ‘ I 0 I I 1 I 20 40 60 80 Depth, A Figure 6 . Changes in the palladium concentration at the surface of Ni94P& alloy during layer-by-layer etching. Applications of Texture Analysis . 31 Cube Texture Formation in Ni-Pd and Ni-Pd-W Alloys for HTS Tapes Auger electron spectroscopy was used to study surface segregation in Ni9~Pdhtapes in more detail. The texture in the test alloys was created by rolling and vacuum annealing at 1050°C for 1 h.

Warlimont eds. (1985). S. V. M. B. Yakovlev, Physics of Metals and Metallography 87, 221 (1999). M. Copley, D. Beck, 0. Esquivel and M. Bass, AIP Conf. Proc. 50. 161 (1978). [36]T. N. Afonso. Appl. Phys. A 62, 513 (1996). Applications of Texture Analysis . 45 Applications of Texture Analysis: Ceramic Transactions,Volume 201. Edited by A. D. Rollett Copyright © 2009 The American Ceramic Society.

Download PDF sample

Applications of Texture Analysis


by Richard
4.1

Rated 4.88 of 5 – based on 16 votes